Products

Double Twist Bunching Machines


Double twist bunching machine is a useful and talented machine equipped with the latest technology that can offer maximum production in a short time with its ability to twist at high speeds, less scrap output and energy efficiency.

The double twist bunching machine has the ability to work for 24 hours when operated with vatmak pay offs or high standard pay offs.

Double twist bunching machine, (7, 19, 37) can be used for stranding multiwire flexible coppers and hard copper, aluminum, aluminum alloys. It can also be used for laying banded or tapeless insulated cables to produce sector-shaped cables from copper and aluminum.

VATMAK manufactures double twist bunching machines with state-of-the-art equipment that can operate continuously at high speeds for 630 coil diameters and 800 coil diameters.


MACHINE TYPE

Bobbin Size
(mm)

Line Speed
(m/min)

Geared Speed
(twist/min)

Cross Section
(mm²)

DTB 630

630x475mm

0-300 m/min

7000 tpm

0,09-6mm²

DTB 800

800x600mm

0-300 m/min

5000 tpm

0,2-16mm²


Advantages at a glance:

Compact Design;

• WIRE TENSION CONTROL MECHANISM

• ANTI-VIBRATION BEARING DESIGN
Low vibration and less heating in operation so less breakdown,

• SMART BOW DESIGN
Less friction path and lower wire friction, high speed and less resistance change Smaller bow turning dianeter allows you to running higher rpm at same linear bow speed

• SENSITIVE OPERATING SYSTEM WITH ENCODER AND TENSION CONTROL
Error-free winding with smart traverse position controlling

• USER-FRIENDLY WIRE-PASS
Easier wire drawing and reduction in wire turn

And in total the machine designing and high efficiency motors provide you with 10 kw energy consumption at 6000 twists.

VATMAK 630 DOUBLE TWIST BUNCHING MACHINE
TECHNICAL SPECIFICATIONS

Experienced Values Of
Strand Cross Section             :... 0,35 mm² mit s = 6200 S/min
and Practical Max.                  ... 0,50 mm² mit s = 6200 S/min
Number Of Twists                   ... 0,75 mm² mit s = 6200 S/min
                                                ... 1,00 mm² mit s = 6000 S/min
                                                ... 2,50 mm² mit s = 4200 S/min
                                                ... 4,00 mm² mit s = 3300 S/min
                                                ... 6,00 mm² mit s = 2200 S/min


Easy setup

Easy Cleaning and Maintenance

Easy to use